Rc Model Boat Bow Thruster
3d printed bow thruster, channel diameter 10mm, using a small electric motor (7x16mm motor n700). more details at www.microboathobby.com. Bow thrusters i need some good recommendations of size and sources to purchase the bow thrusters for a 36 x 14 boat. i will be adding them to the front and back of this boat.. Find best value and selection for your rc boat bow thruster search on ebay. world's leading marketplace..
In the real boats, you will see a propeller. most model bow thrusters use a paddle impeller to move water in either direction. i would prefer bow thruster to be on its own channel.. I set the bow thruster up in my armidale class patrol boat using one of dave milbourn's (action electronics) excellent p94 units. this gives control of both motors, plus the bow thruster which, in my case as i use mode 1, is controlled by vertical movement of the left stick, through a separate esc.. Raboesch bow thruster 14/16mm x154mm these very powerful bow thrusters are supplied fully mounted with a power 400 7.2-volt electrical motor the propulsion is provided by a flat propeller (pedal) which pressurises the water through jet nozzles whereby the entire assembly functions as a pump..